ZHANG Bin,CAI Pengfei,HE Zhengsong.Design of a Measurement-while-drilling System Powered by Small-sized Electrical Generator for High Temperature Applications[J].Journal of Chengdu University of Information Technology,2019,(04):375-379.[doi:10.16836/j.cnki.jcuit.2019.04.009]
基于小型发电机的耐高温随钻测量系统设计
- Title:
- Design of a Measurement-while-drilling System Powered by Small-sized Electrical Generator for High Temperature Applications
- 文章编号:
- 2096-1618(2019)04-0375-05
- 分类号:
- TN914
- 文献标志码:
- A
- 摘要:
- 基于泥浆压力的随钻测量系统在钻井作业中,利用井下子系统实时测量钻头的方位和钻 进状态,将数据以泥浆压力波形式传输回地面,由地面子系统进行信号解码。井下子系统采用 小型发电机供电,与传统的电池供电相比,可以减少因更换电池导致的施工进度减缓。为适应 井下的高温环境,设计了基于小型发电机的耐高温井下子系统。测试表明,该子系统可以在 170 ℃的高温环境下,连续正常工作150 h。还设计了基于水循环的系统联合测试平台,可以 完整测试系统的发电、稳压、信号编码、脉冲发送、信号检测和解码等流程。
- Abstract:
- In Measure-while-drilling(MWD)systems based on mud pressure telemetry, the down-hole subsystem measures real-time parameters such as inclination, azimuth, and tool face angles, and then it transmits the data in the form of mud pressure pulses up to the ground, where the ground subsystem decodes the information encoded in the pulses. To power the down-hole subsystem, a small- sized electrical generator is utilized, which eliminates the time due to battery-switching in the traditional battery-based powering scheme. To accommodate the need for high temperature down-hole applications, a high temperature-proof down-hole subsystem powered by small-sized electrical generator is designed and tested. Experiments show that the subsystem can work normally for 150 h under 170 ℃.A unified testing platform based on water circulation is also designed and built, which can conveniently test the whole workflow of the system: power generation, voltage regulation, pulse transmission, detection and decoding.
参考文献/References:
[1] 刘树坤,汪勤学,梁占良,等.国内外随钻测量技术简介及发展前景展望[J].录井工
程,2008(4):32-37.
[2] 江佩佩.泥浆波随钻传输系统中信号处理方法的研究[D].成都:电子科技大
学,2016.
[3] Kotsonis S,Orban J,Hache J.Apparatus and method for generating
electrical power in a borehole:U.S.Patent 7,133,325[P].2006-11-7.
[4] Cooley J,Signorelli J,Lane J.Inertial energy generator for supplying
power to a downhole tool: U.S.Patent 9,206,672[P],2014-9-18.
[5] Yang L,Xu M,Peng H.A new series hybrid DC-DC converter for wide input
range with SiC[C].IEEE 6th Workshop on Wide Bandgap Power Devices and
Applications.2018:154-158.
[6] Chen W,Fang B,Wang Y.MWD drilling mud signal de-noising and signal
extraction research based on the pulse-code information[C]. 2010 International
Conference on Wavelet Analysis and Pattern Recognition.2010:244-249.
[7] Zhao J,Wang L,Li F,et al.An effective approach for the noise removal of
mud pulse telemetry system[C].8th International Conference on Electronic
Measurement and Instruments.2007:971-974.
[8] Rodney P,Gleitman D,Dudley J.Surface real-time processing of downhole
data:U.S.Patent 7,999,695[P].2011-8-16.
[9] 张占松,蔡宣三.开关电源的原理与设计[M].北京:电子工业出版社,2004.
[10] 张植保.变压器原理与应用[M].北京:化学工业出版社,2009.
[11] Lenk R.实用开关电源设计[M].北京:北京图灵文化发展有限公司,2006.
[12] Cuk S.Modelling,analysis,and design of switching converters
[D].Pasadena: California Institute of Technology,1976.
[13] Vicor Corporation.DCM4623xD2K17E0yzz isolated,regulated DC converter
datasheet[M].Andover:Vicor Corporation,2017.
[14] Texas Instruments.50-W, 48-V input,12-V output, isolated DC-DC
converter datasheet[M].Dallas:Texas Instruments,2010.
[15] Kurokawa F,Yoshida R.Transient response of fast digital PID control
switching power supply[C].IEEE Vehicle Power and Propulsion Conference.2012:614
-617.
相似文献/References:
[1]蔡鹏飞,张 斌.面向随钻测量的泥浆压力信号脉冲识别研究[J].成都信息工程大学学报,2019,(04):380.[doi:10.16836/j.cnki.jcuit.2019.04.010]
CAI Pengfei,ZHANG Bin.Measurement while Drilling-oriented Identification of Mud Pressure Signal Pulse[J].Journal of Chengdu University of Information Technology,2019,(04):380.[doi:10.16836/j.cnki.jcuit.2019.04.010]
备注/Memo
收稿日期:2019-03-09 基金项目:四川省教育厅重点资助项目(17ZA0074)