LI Yao-zhong,LIU Jun,MA Shang-chang,et al.Design of Infrared Temperature Acquisition Circuit based on Z-Stack Communication Protocol Stack[J].Journal of Chengdu University of Information Technology,2017,(05):474-478.[doi:10.16836/j.cnki.jcuit.2017.05.002]
基于Z-Stack通信协议栈的红外地温采集电路设计
- Title:
- Design of Infrared Temperature Acquisition Circuit based on Z-Stack Communication Protocol Stack
- 文章编号:
- 2096-1618(2017)05-0474-05
- 关键词:
- 大气探测应用; 电子与通信工程; 红外地温; Z-Stack协议栈; Stefan-Boltzmann方程; 数据采集
- Keywords:
- atmospheric sounding applications; electronic and communication engineering; infrared temperature; Z-Stack protocol; Stefan-Boltzmann equation; data acquisition
- 分类号:
- TN915.04
- 文献标志码:
- A
- 摘要:
- 为适应气象现代化、智能化的发展需求,完善对不同下垫面地表温度的气象观测资料。设计了一种基于ZigBee通信应用软件Z-Stack协议栈的智能红外地表温度采集电路,该设计应用Z-Stack协议栈分层软件结构,协调调度软硬件在各层级之间的工作。设计将差分电压采集电路与单端电压采集电路相整合,通道0采用128倍增益差分测量目标温度,通道1单端1倍增益测量自身电阻值电压,用Stefan-Boltzmann方程修正传感器自身体温对目标温度的影响,使IRR-P红外传感器在-40 ℃~70 ℃可以获取较高的测量精度; 并且能够实现对观测要素的数据采集、处理、存储等功能,设计测试结果表明:该设计能够实现对传感器信号的高精度采集与处理,提高了观测资料的准确性。
- Abstract:
- In order to adapt to the needs of the development of meteorological modernization and intelligence,and improve the meteorological observation data of surface temperature on different underlying surfaces, a design of temperature acquisition circuit of Z-Stack protocol stack of ZigBee communication software based on the intelligent infrared surface is designed. It applies the Z-Stack protocol stack hierarchical software structure, hardware and software at all levels of coordination between the work. The design of the differential voltage acquisition circuit with single ended voltage acquisition circuit integration, channel 0 by 128 times the gain differential measurement of target temperature, channel 1 single ended 1 times its resistance value of the voltage gain measurement, using the modified Stefan-Boltzmann equation of sensor temperature influence on the measurement accuracy of the target temperature, IRR-P infrared sensor in -40 ℃-70 ℃ can get a higher measure precision; moreover, it can realize the functions of data acquisition, processing and storage of observations and etc. The design of test results show that the design can achieve high precision acquisition and processing of sensor signals, and it can improve the accuracy of observation data.
参考文献/References:
[1] 张霭琛.现代气象观测[M].北京:北京大学出版社,2000.
[2] 童英华.基于Z-Stack的无线温湿度采集系统[J].现代电子技术,2012,35(23):115-117.
[3] 吴仲城,孙怕宁,虞承端,等.网络化智能传感器/执行器的设计及接口标准IEEE1451.2[J].仪表技术与传感器,2000,7:1-3.
[4] 储呈敏,马尚昌,张素娟,等.地表温度测量方法研究综述[J].电子设计工程,2014,22(6):187-189.
[5] 朱晓博,马尚昌,张素娟,等.传感器智能化及电子数据表格更新方式的研究[J].成都信息工程学院学报,2014,29(1):59-64.
[6] 李俊斌,胡永忠.基于CC2530的ZigBee通信网络的应用设计[J].电子设计工程,2011,19(16):108-111.
[7] 周艳红,马尚昌,赵静,等.基于C#的常规气象要素采集监控系统设计与实现[J].成都信息工程学院学报,2015,30(6):551-554.
[8] 程昌玉,梁海河,王柏林.红外与铂电阻地表温度测值分析对比[J].气象科技,2010,38(4):450-455.
[9] 李薇,张宏升,康凌,等.OS530系列红外辐射温度表测量地表温度的应用[J].气象水文海洋仪器,2003,(1):13-17.
[10] 朱苗苗,牛国锋,程宏斌.基于Z-Stack协议栈的无线温湿度采集系统[J].计算机系统应用,2016,25(10):258-262.
[11] 周湶,马小敏,陈伟根,等.基于Zigbee和零序电流增量法的配网单相接地故障定位方法[J].电力系统保护与控制,2012,40(9):62-68.
[12] 何伟刚,李政林,章帆,等.基于ZigBee的煤矿井下无线传感器节点设计[J].现代电子技术,2017,40(2):122-124.
[13] 王春武,程礼邦,刘春玲,等.状态机在嵌入式系统设计中的应用[J].单片机与嵌入式系统应用,2016,16(9):12-14.
[14] 中国气象局综合观测司.自动候站功能规格需求书[Z].北京:中国气象局,2015:1-183.
[15] 叶湘滨,李文,杨雪,等.“即插即用”智能变送器模块的设计与实现[J].仪表技术与传感器,2009,10:28-30.
备注/Memo
收稿日期:2017-04-29 基金项目:国家重大科学仪器设备开发专项资助项目(2012YQ110205)