FENG Dong,YU Xiaomin,ZHANG Yilin,et al.Design of Motion SpO2 Detecting System based on VSCLSM Algorithm[J].Journal of Chengdu University of Information Technology,2024,39(02):142-147.[doi:10.16836/j.cnki.jcuit.2024.02.003]
基于变步长凸组合LMS自适应滤波高原动态血氧检测系统设计
- Title:
- Design of Motion SpO2 Detecting System based on VSCLSM Algorithm
- 文章编号:
- 2096-1618(2024)02-0142-06
- 关键词:
- 血氧饱和度; 光电容积脉搏波; 变步长凸组合LMS自适应滤波; 高原反应; 物联网
- Keywords:
- SpO2; PPG; variable step-size convex combination LMS filter algorithm; altitude reaction; internet of things
- 分类号:
- TP391
- 文献标志码:
- A
- 摘要:
- 针对基于光电检测方法的血氧仪只能在静止状态下测试血氧饱和度(血氧)的问题,提出一种基于变步长凸组合LMS自适应滤波动态血氧检测方法。方法对原始光电描记脉搏波信号经预处理后,通过固步长与变步长LMS自适应算法组合,以三轴加速度计采集信号作为运动噪声参考信号,获得理想脉搏波信号再准确计算血氧值。在此基础上,开发了一套基于物联网的穿戴式高原血氧检测系统,经过模拟正常行走及在不同海拔条件下测试,最大误差不超过4%,验证了算法的有效性和准确性。结果显示,基于物联网的血氧监测系统对于高原旅游中高原反应的实时监测与提醒具有实际意义。
- Abstract:
- Aiming at the issue that SpO2 measurement by photoelectric pulse oximetry can only be measured accurately in a static state, an algorithm based on variable step-size convex combination LMS adaptive filtering(VSCLMS)for SpO2 in a dynamic state is proposed. Firstly, a photoplethysmography(PPG)signal is acquired in a motion state and preprocessed by low-pass filtering. Then,using the tri-axial accelerometer as the reference signal of motion noise, the ideal PPG signal is obtained through the VSCLMS adaptive algorithm and SpO2 values are acquired.Finally,a motion SpO2 detecting system for altitude reaction based on the wearable devices and the Internet of Things is developed. After simulating normal walking state at a different altitude,the error is less than 4%, which verify the effectiveness and accuracy of the proposed algorithm.The motion SpO2 detecting system is of practical significance for real-time monitoring and reminding of the altitude reaction in plateau tourism.
参考文献/References:
[1] Tsai W H,Lin B Y,Yang C C,et al.Assessment of vascular health with photoplethysmographic waveforms from the fingertip[J].IEEE Journal Biomedical Health Information,2017,21(2):382-386.
[2] 叶如陵.环境危害因素对高原旅行者健康的影响[J].中华疾病控制杂志,1999,3(4):309-310.
[3] 韩文波,曹维国.光电式脉搏波监测系统[J].长春光学精密机械学院学报,1999,22(4):30-34.
[4] 吴全玉,贾恩祥,戴飞杰,等.便携式低功耗可穿戴心率血氧监测系统的设计[J].江苏理工学院学报,2020,26(4):53-61.
[5] Maeda Y,Sekine M,Tamura T.Relationship between measurement site and motion artifacts inwearable reflected photoplethysmography[J].Journal of Medical Systems,2011,35:969-976.
[6] Poh M Z,Swenson N C,Picard R W.Motion-tolerant magnetic earring sensor and wireless earpiece for wearable photoplethysmography[J].IEEE Transactions on Information Technology in Biomedicine,2010,14:786-794.
[7] Sharma H.Heart rate extraction from PPG signals using variational mode decomposition[J].Biocybernetics and Biomedical Engineering,2019,39(1):75-86.
[8] Sun B,Wang C C, Chen X H,et al.PPG signal motion artifacts correction algorithm based on feature estimation[J].Optik- International Journal for Light and Electron Optics,2019,176:337-349.
[9] Ram M R,Madhav K V,Krishna E H,et al.A Novel Approach for Motion Artifact Reduction in PPG Signals Based on AS-LMS Adaptive Filter[J].IEEE Transactions on Instrumentation and Measurement,2012,61(5):1445-1457.
[10] Peng F L,Zhang Z B,Gou X M,et al.Motion artifact removal from photoplethysmographic signals by combining temporally constrained independent component analysis and adaptive filter[J].Biomedical Engineering Online,2014,12:103-111.
[11] Islam M T,Ahmed S T,Zabir I,et al.Cascade and parallel combination(CPC)of adaptive filters for estimating heart rate during intensive physical exercise from photoplethysmographic signal[J].Healthcare Technology Letters,2018,5(1):18-24.
[12] Sun X,Ping Y, LI Y,et al.Robust heart beat detection from photoplethysmographyinterlaced with motion artifacts based on empirical mode decomposition[C].IEEE-EMBS International Conference on Biomedical & Health Informatics.IEEE,2012:775-778.
[13] 陈孝英,杨济民.基于STM32血氧心率检测仪的研制[J].电脑知识与技术,2017,13(15):231-233.
[14] 张虹,金捷,孙卫新.数字式脉搏血氧饱和度检测系统的研制[J].生物医学工程与临床,2002,3(6):125-128.
[15] 张林.运动状态下血氧饱和度检测算法研究[D].重庆:重庆理工大学,2021.
备注/Memo
收稿日期:2023-04-29
基金项目:四川省科技计划重点研发资助项目(2023YFS0468)